Pro Gardening Instructions in English

PRO GARDENING AUGER SYSTEM

Attach to any 3/8" or 1/2" drill. Made of 1/2" thick all-steel construction.

Edges are sharpened for better digging. May be purchased with (or comes with) 26" extension.

NOTICE:

Read and understand all instructions. Failure to follow all instructions may result in personal injury.

SAFETY INFORMATION:

The Pro Gardening Auger System is a tool designed to make work easier for the user. But like any tool or mechanical device, it should be used in a safe and responsible manner. As with any rotating or moving tool, loose clothing should not be worn while the Auger is in operation. It is important that the user operate the Auger in a manner so as to minimize the flinging or throwing of debris. The user, and anyone else should wear safety glasses in the work area. The user should always have a good grasp of the drill and be mindful that the drill can develop torque action when working in compacted or undisturbed soils, clay, rocky areas, or among tree roots. We strongly recommend that the user always use two hands when operating the Auger and never start the drill with the Auger lodged or dug into heavy material due to high initial torque action. Always use the locking pin when using the extension.

FOUR EASY STEPS FOR ATTACHMENT TO THE DRIL

Unplug the drill from the power supply.
Open the chuck jaws of the drill in accordance with the manufacturer's instructions.
Insert the non-blade or head end of the auger into the open chuck jaws of the drill.
Carefully tighten the chuck jaws around the head in accordance with the drill manufacturer's instructions.

FOUR EASY STEPS FOR DETACHMENT FROM THE DRILL

Unplug the drill from the power supply.
Lay the drill with the auger on the ground or other horizontal surface.
Carefully loosen the chuck jaws surrounding the head in accordance with the manufacturer's instructions.
Carefully remove the auger from the drill's chuck jaws.

SEVEN TIPS FOR USING THE AUGER IN THE SOIL

Once the auger is secured to the drill, plug the drill into the power source.
To make the auger dig, the drill control lever must be in the forward rotation.
Begin the process at a low speed to confirm the correct operation of the drill and the forward rotation. Repeat this step several times to familiarize yourself with the power of the auger.
Place the auger tip on the dirt, keeping the auger in an upright position.
At first, gently squeeze the drill trigger to begin the hole.
To dig in hard soil such as clay use a tapping motion. Start with light downward pressure. If downward pressure is increased, be aware and mindful that the torque will also increase. Find a comfortable pressure range in which to work.
Let the drill do the work for you. Know its capabilities and adjust your work action and speed so as not to overload the drill.

MANUFACTURER'S LIFETIME GUARANTEE

Rocky Mountain Sales

2326 Industrial Road - Suite 400, #108
Emporia, KS 66801

Unconditionally guarantees the following to USA residents:

If the accompanying auger should ever become damaged, you may return it to our customer service center for a replacement auger, no questions asked. If you mail it to the customer service center, enclose $9.00 USD to cover shipping and handling, and mail it to us at Rocky Mountain Sales, 2326 Industrial Road - Suite 400, #108, Grass Valley, Emporia, KS 66801. The manufacturer of the accompanying auger warrants that this guarantee shall remain in effect for the lifetime of the company and assumes no responsibility for representation other than these specified herein.

A NOTE FROM THE MANUFACTURER

We are able to offer a remarkable guarantee because this is a quality product that actually works. Occasionally, our customers have run into problems that are traced back to the drill, or, heaven forbid, operator error. Here are a couple of things to watch for:/p>

If the end of the auger or extension slips from the chuck, there can be several causes. If you are using a 1/2" drill or larger, check that the jaws of the chuck are set on the flat surface of the hexed head, rather that on the corners. Sometimes, too, after much use, a drill chuck just loses its ability to maintain its grip, and loosens of its own accord. To see if this is the case, we suggest you try the auger on another drill.
Drills are air-cooled, and are meant to be run at a consistent speed when engaged in any chore. Slowing or stopping the motion of the drill while the auger is immersed in the soil can cause damage to your drill.
If your cordless drill is not giving you the power you want, try using a corded drill. A good corded drill will tend to deliver more power. More power from your drill, whether corded or cordless, will increase the auger's efficiency, especially in harder soil and clay.

Should you require any assistance, you can always reach us at (530) 218 1412, or through or website at progardening.com.